§ 33-284.99.52. Development Parameters.  


Latest version.
  • A.

    Except as otherwise provided in this section, all new development and redevelopment within the NCUAD shall comply with the development parameters as set forth in Article XXXIII(K) of this chapter.

    B.

    All new development and redevelopment in areas designated MCS shall comply with the development parameters for the MC area as set forth in Article XXXIII(K) of this Code.

    C.

    At a minimum, streets within the NCUAD shall comply with the Street Type Parameters for Type 5, Minor Street, as provided in section 33-284.85. It is provided, however, that lots with frontage on streets with a zoned right-of-way of seventy (70) feet or greater may instead be developed in accordance with the following standards:

    1.

    The front and side street setbacks shall be measured from the property line.

    2.

    Required street trees may be planted within the setback area.

    3.

    For business and mixed uses, the minimum sidewalk width shall be five (5) feet.

    4.

    For multi-family residential uses, the minimum sidewalk width shall be eight (8) feet.

    5.

    For single-family residential uses, the minimum sidewalk width shall be six (6) feet.

    D.

    Buffering between dissimilar land uses shall be in accordance with Section 18A-6(H) of this Code.

    E.

    Where a proposed development abuts an area designated for single-family residential on the Future Land Use Map of the CDMP, the height of the proposed development along the abutting property line, for a minimum depth of 50 feet, shall be no greater than three stories. Examples of the required height transition are shown below.

    33-284-99-52.png

    Example of building heights transition from mixed-use to single-family.

(Ord. No. 11-65, § 5, 8-2-11; Ord. No. 15-19, § 1, 3-17-15; Ord. No. 18-02, § 3, 1-23-18)